Applications
There are a number of applications or software packages that can be used on the hpc clusters. To see what's available type:
module avail
The output will look like this:
[feverdij@hpc12:~]$ module avail -------------------------------------------------- /usr/share/Modules/modulefiles -------------------------------------------------- dot module-git module-info modules null use.own --------------------------------------------------------- /etc/modulefiles --------------------------------------------------------- mpi/openmpi-x86_64 -------------------------------------------------- /opt/ud/LOCAL/etc/modulefiles --------------------------------------------------- abaqus/2019 edem/2018 nastran/2014.1 abaqus/2021(default) eman/2.12 nastran/2014.1_sdk abaqus/6.14 eman/2.2 nastran/2018.2.1 adf/2016.103 eman/2.21 nastran/2019 ams/2020.101 eman/2.31 nastran/2019_fp1 ams/2021.102 emspring/0.86.1661 nastran/2020 ansys/18.1 FDTD/8.15.758 numeca/2015-01 ansys/19.1 finemarine/5.1 omni3d/5.5 ansys/2019r1 fsl/5.0.9 openfoam/2.2.2 ansys/2019r2 geopsypack/2.9.0 openfoam/2.4.0 ansys/2019r3 gromacs/5.1.2 openfoam/3.0.1 ansys/2020r1 imod/4.9.2 openfoam/4.1 bader/0.28a intel/10.1 openfoam/v2006 biogeme/2.4 intel/11.1 peet/1.11.1 chimera/1.11.2 intel/2013sp1 petsc/petsc-3.6.2 cistem/1.0.0-beta intel/2016 phenix/1.13 comsol/53a intel/2017u4 phonopy/1.10.8 comsol/54 intel/2018u1 povray/3.7 comsol/55(default) intel/2018u2 relion/2.0.5 comsol/56 intel/2018u3 relion/2.1 convergecfd/hpcx/3.0.19 intel/2019u2 relion/2.1.0 convergecfd/intelmpi/3.0.19 intel/oneapi_2021u2 relion/2.1b1 convergecfd/intelmpi_2018/3.0.19 lammps/29Oct20 samcef/2021.2i8 convergecfd/mpich/3.0.19 libctl/3.2.2 scipion/1.0.1 convergecfd/openmpi/3.0.19 LOCAL scipion/1.1 ctffind/4.1.8 matlab/2017b sinfo/0.0.48 cuda/10.2 matlab/2018a spinw/5.5 cuda/11.2(default) matlab/2019b starccm+/2021.1.1 cuda/7.0 matlab/2020a(default) tecplot/2015R1 cuda/7.5 matlab/2020b tecplot/2017R2 cuda/8.0 matplotlib/1.5.1 tecplot_for_converge/2020.1.0 cuda/9.2 matplotlib/2.0.2 torque/4.2.10 devtoolset/10 maui/3.3.1 vasp/5.3.5-vtst devtoolset/6 meep/1.3 vasptest/5.4.1 devtoolset/8(default) meep/1.5 vsaero/7.7 devtoolset/9 motioncor2/1.0 vsaero/7.9 dipimage/2.8 motioncor2/1.0.5 vsaero/8.0 dipimage/2.9 mpi/openmpi-1.8.8-gnu edem/2017 mpi/openmpi-1.8.8-intel
Now you can choose any of the applications from the list with the module load command. If, for example, you want to use Matlab, type:
module load matlab
There are two versions of Matlab available, the command above selects the highest version (2016b). If for some reason you want to use the older version, type:
module load matlab/2015a
Now you can start Matlab from the commandline:
[jsmith@hpc10 ~]$ matlab
MATLAB is selecting SOFTWARE OPENGL rendering.
< M A T L A B (R) >
Copyright 1984-2016 The MathWorks, Inc.
R2016b (9.1.0.441655) 64-bit (glnxa64)
September 7, 2016
To get started, type one of these: helpwin, helpdesk, or demo.
For product information, visit www.mathworks.com.
>>
If you have an X server running on your PC or laptop and you are logged in using X-forwarding, Matlab should start with a graphical desktop.
Please note that not all applications that are available will actually work, some of them can only work on a few specific hpc clusters due to license restrictions.
For example, software exclusive for the HPC12 is Numeca, Abaqus, Vsaero, Convergence CFD and Simcenter Samcef